How to carry shoes that shrug in the fingers

How often after buying shoes is it found to be a little tight? Yes, almost always. For human legs are not perfect, and shoe pads are standard. What to do? How to distribute shoes that are a little tight in the fingers? Do not put new shoes or boots in the closet.

How to carry shoes that shrug in the fingers

As one well-known cartoon character said: "Calm, only calm." Today we'll figure it out together. Go.

General rules

It should be borne in mind that to stretch shoes, a little narrow in the fingers, it is possible only half the size. If you really try, then the size. Not more. And even then, this process cannot be called a stretch according to all the rules. Shoes just take the shape of your foot, and the discomfort in the toe area disappears.

There are several methods that are widely used at home to correct the situation. But, they are not suitable for all materials. Natural leather and fabric are best stretched. The most “tight” materials are rubber and artificial leather. Consider in detail all the options for stretch marks.

Alcohol and alcohol-containing liquids

A method known to our grandmothers. You will need:

  • alcohol (about 40-50 ml)
  • footwear
  • thick but not thick socks
  • your legs

The procedure is very simple. It is necessary to pour half the alcohol (or cologne) inside the shoe. The second half is wet socks. Then you need to put on shoes, boots, boots or whatever you have there, and for a while go around them around the house.

Tip. Stretch time can be used wisely in the kitchen.

Usually 1.5-2 hours is enough for the tight-toe shoes to take on the desired shape and stop pressing. You just need to walk, not sit and not even lie. Otherwise there will be no sense.

Some sources recommend using this method with caution. Allegedly, alcohol can harm materials, and shoes will go bad. We dare to disagree. Because such an amount of liquid is not capable of doing any harm.

By the way, these same sources are strongly advised to use thick socks. Or even 2 pairs. And here we also do not agree. If only because getting into new shoes in thick socks is quite problematic. Because after such an execution, your shoes will turn into galoshes, and will clap on the foot. Or even worse, the material can simply burst from excessive stretching.

Tip. There are recommendations to moisten with alcohol also the outer surface of the shoe. Only for some reason it is not explained why. Indeed, what is the use of such a procedure? Especially if it is a high-quality leather pair of boots that does not get wet. Or, for example, rubber boots.

Ice

There is another option, how to stretch the shoes, which presses a little in the fingers. You will need:

  • ordinary cold water (even suitable from the tap)
  • a pair of very dense packets (intact, without holes or damage)
  • footwear
  • elastic band or tight rope
  • frost on the street (an ordinary household refrigerator freezer will do)

What needs to be done to stretch shoes? You need to put the bags inside the shoes or shoes. Then carefully straighten. Pour cold water inside. Not up to the top of the bag. And so much so that the bag in the shoes was filled to about the middle of the block, if it is shoes. Or ankle-deep if it's boots or boots.

Now tightly tied packages near the water itself. After all the procedures, the shoes are exposed to frost on the balcony. Or put strictly on the sole in the freezer.

Tip. For hygiene reasons, we recommend wrapping a couple of newspapers, cling film or another bag.

In this position, the shoes are left for a period of 18 hours to a day.What happens with this? Water freezes, ice expands and stretches the skin.

After that, it remains only to bring the steam into the heat, to melt the ice. And you can safely shoe new thing. By the way, this method works fine only on natural materials. But it should be borne in mind that patent leather may not withstand such a treatment at low temperatures.

How to carry rubber shoes?

It happens that rubber boots or gym shoes are also a little tight in the fingers. It's not a problem. Popular wisdom has long come up with a way to stretch such shoes. You will need:

  • a large basin to fit the sole in width
  • hot water, about + 75-85 ° С
  • thick socks
  • a pair of thick film bags
  • your legs

The procedure is as follows. Thick socks are put on the legs. On top fasten packages. This design is needed so as not to burn the skin. Now very hot water is poured into the basin. And they put shoes in it. Rubber boots can be completely dipped. In sneakers, it is recommended to warm only the sole, without affecting the fabric base of the top.

Warming up time is about 15-20 minutes. Now you need to remove the shoes from the water and, without waiting for the rubber to cool, put it on your feet. Then it remains only to walk in boots or sneakers for about an hour. During this time, the shoes in the area of ​​the fingers will stretch a little, cool down and take the form of a foot.

Tip. Do not confuse rubber with polyurethane foam. Shoes with a sole out of it will not stand the test of high temperatures. She will turn into galoshes.

Useful Tips

Some sources recommend rinsing shoes inside with boiling water. Allegedly after that, it will stretch. Absolute nonsense. From such treatment, the shoes will only get wet. But the leg does not sit.

How to distribute shoes

One more crazy advice: to fill shoes socks tightly with wet newspapers and leave to dry, but not warm. And how much will such a design dry? A week? Month? This is if not warm. Plus, the shoes will not stretch. Checked.

Some people buy very expensive shoes. Rarely, but it can also be cramped in the area of ​​the fingers. The owners are afraid to use home stretching methods, fearing to cause irreparable harm. But there is a way out for them. More precisely, as many as 3:

  1. Contact a good shoe workshop. For a very affordable fee, the shoemaker will stretch the shoes in the right place. And without any harm. Just don't ask for the impossible. Remember - half size, maximum size.
  2. Sewing shoes to order. An expensive but sometimes necessary measure. Especially for people with non-standard feet. They will not fit ordinary shoes from the mass market. But such a new thing will sit perfectly.
  3. Thanks to the shoe industry for selling a wide variety of sprays and foams. They are designed specifically for stretching shoes in problem areas. By the way, the prices are quite affordable, but the bottle lasts for a long time.

Using such tools is very simple. It is enough to know the material from which the experimental shoes are made. Then it remains to carefully read the instructions on the package or bottle, so as not to make a mistake with the choice. And the last thing to do is strictly follow this very instruction.

Believe me, applying more funds will not improve the final result. As well as an increase in bearing time. There is a limit to everything. Therefore, do not try to stretch your shoes too much. It could hurt her.

What are good industrial facilities? Ease of use and a huge assortment. You can pick up foam for absolutely any material.

Now you are not afraid of a new acquisition. You are well aware of how to distribute shoes that are a little tight in the fingers. Have a nice shopping and happy legs!

Video: how to stretch tight shoes and distribute shoes

We recommend reading


leave a comment

Submit

avatar
wpDiscuz

No comments yet! We are working to fix it!

No comments yet! We are working to fix it!

Pests

beauty

Repairs